1TG2-3000C一款专门为企业网络护航的测试仪

NETSCOUT 1TG2-3000C一款专门为企业网络护航的测试仪，无论是网络出现什么故障，只要一分钟就能轻轻松松测出问题的所在，并帮助技术人员快速的修复网络问题，咨询电话：13715297810 江先生 0755-83999818 QQ：1016657483

NETSCOUT 1TG2-3000C简介：

●以太网和 Wi-Fi 测试*硬件

●识别和定位非 802.11 源，例如蓝牙和微波炉

●利用路径性能测试验证 SLA

●一键可编程自动测试

●Wi-Fi 或有线内联数据包捕获

●提供 Link-Live 云门户存储测试结果
通用铜线、光纤和 Wi-Fi 故障排除功能

手持式 OneTouch AT G2 网络助手提供了多种故障排除方案。测试仪采用双重铜缆和光纤测试端口，以方便排除 10/100/1000 Mbps 双绞线和 100/1000 Mbps 光纤以太网网络的故障。无需镜像端口或分路器，双端口简化了在线数据包捕获和 VoIP 监控。为了进行 Wi-Fi 网络故障排除，OneTouch AT G2 测试仪集成了 802.11ac 双波段 Wi-Fi 无线电和 3x3 天线。测试仪连接至有线和 Wi-Fi 网络时，在单一页面上并列显示测试结果，有助于问题域隔离。

OneTouch AT Network Assistant 采用模块化设计。10G 模块用于在高达 10 Gbps 速率下测试有线 100 Mbps 到 10 Gbps 以太网交换机端口和链路性能。

从跳接线和 Wi-Fi 到云的全功能测试

验证和故障排除接入网络时，需要从客户设备连接网络的位置进行测试 — 此设备可能是 PC、平板、智能手机、IP 电话、打印机、POS 终端、工业设备控制器或医疗成像仪等。OneTouch AT 可证明网络良好 — 通过模拟客户设备并评估网络性能。其评估、分析和记录各个关键网络元素的性能：网络布线、以太网 (PoE) 供电交付、与*近交换机的连接、与*近接入点的连接，以及企业网、云或因特网中关键网络服务和基于服务器应用程序的性能。

标准化网络验证和故障排除

使用直观的触摸界面和设置向导创建测试配置文件，即根据具体网络、服务和应用设置的一系列测试。建立配置文件，以包容不同类型的用户、设备、地点或技术。配置文件可以非常简单，只有几个测试，也可以是*配置文件，包含几十个测试。配置文件一旦创建，即可保存，以便快速轻松重新使用。创建标准化配置文件库，以提高全体网络支持人员的故障诊断*技巧。与其他 OneTouch AT 用户共享配置文件。利用配置文件建立始终如一的、更快、更有效进行故障诊断和网络验收测试的良好规范。

NETSCOUT 1TG2-3000C is a specialized enterprise network tester escort, regardless of what network fault, as long as a minute you can easily measure the problem, and to help repair the network problems, rapid technological personnel Tel: 13715297810 Mr. Jiang 0755-83999818 QQ:1016657483

NETSCOUT 1TG2-3000C introduction:

Ethernet and Wi-Fi test dedicated hardware

Identify and locate non 802.11 sources, such as Bluetooth and microwave ovens

Using the path performance test to verify SLA

One key programmable automatic test

Wi-Fi or wired inline data packet capture

Provide Link-Live cloud portal storage test results

Common copper wire, optical fiber and Wi-Fi troubleshooting function

Handheld OneTouch AT G2 network assistants provide a variety of troubleshooting solutions. The tester uses double copper and fiber test port, convenient fault to exclude 10/100/1000 Mbps double strand and 100/1000 Mbps optical Ethernet network. There is no need for mirroring ports or divider, and dual port simplifies online packet capture and VoIP monitoring. In order to troubleshoot the Wi-Fi network, the OneTouch AT G2 tester integrated the 802.11ac dual band Wi-Fi radio and the 3x3 antenna. When the tester is connected to the wired and Wi-Fi networks, the test results are displayed juxtaposing on a single page, helping to isolate the problem domain.

OneTouch AT Network Assistant is modular design. The 10G module is used to test the port and link performance of a wired 100 Mbps to 10 Gbps Ethernet switch at a rate of up to 10 Gbps.

Full function test from jump wiring and Wi-Fi to cloud

When verification and troubleshooting access to the network, we need to test from the location of the customer equipment connection network. This device may be PC, tablet, smart phone, IP phone, printer, POS terminal, industrial device controller, medical imaging instrument, etc. OneTouch AT can prove that the network is good - by simulating customer equipment and evaluating network performance. The performance evaluation, analysis and record all the key elements: network cabling, network Ethernet (PoE) power delivery, and the recent switch connection, in connection with the nearest access point, and the enterprise network, cloud or network services in the Internet and based on the key performance of server applications.

Standardized network verification and troubleshooting

Create a test configuration file using an intuitive touch interface and setting wizard, that is, a series of tests based on specific networks, services, and applications. Set up a configuration file to accommodate different types of users, devices, locations, or technologies. The configuration file can be very simple, only a few tests, or advanced configuration files, including dozens of tests。
    Once the configuration file is created, it can be saved so that it can be reused quickly and easily. Create a standardized configuration file library to improve the professional skills of fault diagnosis for all network support personnel. Share the configuration file with other OneTouch AT users. Use the configuration file to establish the best specification that is consistent, faster and more effective for fault diagnosis and network acceptance testing.