雾化喷嘴是斐卓Feizhuo公司主打的喷雾产品，我们的研发设计师具有丰富的喷雾系统和喷嘴的应用和设计经验，能够精准的设计 为出喷嘴的喷雾参数，为用户大大降低成本及能耗。

雾化喷嘴主要应用于纺织厂喷雾加湿系统，厂房喷雾加湿系统，干雾加湿系统，微米级喷雾加湿系统，水气混合喷雾加湿系统，干雾加湿设备，加湿喷嘴，业务覆盖全国。欢迎来电洽谈！

雾化喷嘴样品试用我司均提供免费邮寄，另选型样册须由我司认证版，翻印盗权者将承担法律责任。

空气雾化喷嘴压力输送喷雾装置（内混式）

喷雾喷嘴的优点和特性：

对于扇形喷雾，尺寸A、B、和C是距离喷嘴相应距离处的喷雾宽度。

从喷嘴到很大弥散点的喷雾投射总距离为D.

当使用压力输送液体系统时，液体通过压力被送往喷嘴。液体和压缩空气或者其他气体在内部被混合，以产生完全雾化的喷雾。

Air atomizing nozzle pressure spray device (mixed type)

The advantages of spray nozzle and features:

For the fan-shaped spray, size A, B, and C corresponding distance is the distance the nozzle spray width.

The spray from the nozzle to the maximum dispersion point projected a total distance of D.

When using pressure conveying liquid system, through the pressure to the nozzle.Liquid and compressed air or other gas was mixed in internal, to produce a fully atomized spray.

小流量空气雾化喷嘴BIM系列：

产生平均粒径100micron以下之“微雾”的二流体扇形喷嘴；

对喷雾液体加0.1-0.3MAa程度之压力的液体加压式，有很广的流量调整范围；

喷雾角度60°。

产生平均粒径30micron以下之微雾的二流体扇形喷嘴，不需要供给液体加压装置之虹吸式。

一般应用：

散步：脱模机、除臭剂、油、表面处理剂、防锈剂、润滑剂、蜂蜜、防虫剂、尿素水、其他；

冷却：模具、气体、钢板、钢片、铸物、车体、涂装物、玻璃板、塑胶、其他。

调湿：纸、废气、陶瓷、混凝土、其他

洗净：精密基板、玻璃管、其他

Small flow air atomizing nozzle BIM series:

Below the average particle size of 100 micron 'micro fog' two fluid fan nozzle;

To spray liquid pressure of 0.1 to 0.3 degree of MAa liquid pressure type, there is a wide range of flow adjusting range;

The spray Angle 60 °.

Have an average particle size of micro fog two fluid under 30 micron fan nozzle, do not need to supply the siphon type of liquid pressure device.

General application:

Walking: stripper, deodorant, oil, surface treatment agent, anti-rust agent, lubricant, honey, pest control, urea and other water;

Cooling: mold, gas, steel plates, steel sheets, casting material, car body, coating material, glass, plastic and other.

Humidity: paper, waste gas, ceramic, concrete, other

Wash: precision base board, glass tube, the other