三件组合式扇形喷嘴设计特点  

 扇形喷射喷嘴能提供高冲击力的液柱流或扇形喷雾,喷射角度在0。到110。之间。该喷头产生的喷雾分布均匀，液滴粗细小到中等。当需要几个喷嘴重叠喷射时，特殊设计的边使得喷射所覆盖的区域分布均匀。所有的三件组合式扇形喷嘴  喷头都是精加工的，从而提供准确的流率和喷射角度。三件组合式扇形喷嘴 提供的是广角扇形喷雾，三件组合式扇形喷嘴 提供的是标准及广角实心锥喷雾,三件组合式扇形喷嘴 提供空心锥形喷雾。

The three combined fan nozzle design characteristics

Fan-shaped spray nozzle can provide high impact liquid column flow or fan-shaped spray, spray Angle in 0.By the year 110.In between.The nozzle spray of uniform distribution, droplet size small to medium.When need several overlapping nozzle jet, a specially designed side make the regional distribution evenly covered with spray.All the three combined fan nozzle nozzle is highly processed, so as to provide an accurate flow rate and spray Angle.Three modular fan nozzle is provided by the wide-angle fan-shaped spray, is the standard provided by the three combined fan nozzle and wide-angle solid cone spray, three combined sector provide hollow cone spray nozzle.

喷雾喷嘴喷雾角度和覆盖范围：

喷雾夹角在不同距离下（从喷嘴口算起）的理论覆盖范围（厘米）THEORETICAL COVERAGE AT VARIOUS DISTANCES (IN cm)FROM nozzle ORIPICE 各不相同。

在实际喷雾中，有效喷雾角度因喷雾距离而异，当液体黏度碧水高时，其喷射角度变小，具体取决于黏度，喷嘴流量及喷射压力等。

冲击力 Impact

喷雾对目标表面的冲击，有几处不同的表示方法，与喷雾喷组性能有用的冲击值是每平方厘米冲击力。本质上，该值取决于喷雾形状分布和喷雾角度，首先用公式确定理论总冲击力。然后从表中可查得占理论总冲击力的每平方厘米百分率并乘以理论总冲击力。结果是以公斤/平方厘米表示的喷雾冲击力。液柱流喷嘴产生很大公斤/平方厘米冲击力，可按公式1.9*（喷射压力，公斤/平方厘米）计算。

工作压力Operating Pressure

我们目前提供是数据是喷雾喷嘴或零部件常用的压力范围。一些喷雾喷嘴和零配件可在所给压力之下或之上工作。另一些可在我们的工厂改进或再设计，以适应特定新用途的需要。当您需要更多的喷嘴资料时，请于所在地的代理人取得联系。

The values given in the tabulation sections of this catalog indicate the most commonly used pressure ranges for the most commonly used pressure ranges for the associated spray nozzle for accessories.Some spray nozzles and accessories can perform below or above the pressure shown.

快速链接式实心锥形喷嘴QH系列；

QH系列喷嘴产生一个实心的锥形喷嘴类型，并根据喷头流量和压力伴有43°-90°的喷雾角度。QH系列喷嘴以不可更换的叶片为特征，该叶片有助于冲击区域横断面上的均匀分布。喷雾喷头可迅捷而方便的安装进主体或卸除之。

QH-W系列喷嘴产生一个实心的锥形喷嘴类型，根据喷头流量和压力伴有102°-120°的喷雾角度。QH-W系列喷嘴以不可更换的叶片为特征，该叶片有助于冲击区域横断面上的均匀分布。喷雾喷头很容易安进主体或自其上卸掉，既快而又省力。

Quick links solid cone nozzle QH series;

QH series nozzle to produce a solid cone nozzle type, and according to the nozzle flow rate and pressure of spray Angle with 43 ° to 90 °.QH series nozzle is characterized by an replacement blades, the blade will help uniform distribution on the transverse impact area.Spray nozzle can be quick and easy installation into the body or unloading.

QH - W series of nozzle to produce a solid cone nozzle type, according to the nozzle flow rate and pressure of spray Angle with 102 ° to 120 °.QH - W series nozzle is characterized by an replacement blades, the blade will help uniform distribution on the transverse impact area.Spray nozzle amgen subject or since its off easily, is both fast and energy saving.